Rainwater harvest home Project

Rainwater harvest home Project

The harvest home of rain merely involves the gathering of water from surfaces on that rain falls, and later on storing this water for later use. ordinarily water is collected from the roofs of buildings and keep in rain tanks.
Ground water resource gets naturally recharged through percolation. however because of indiscriminate development and speedy urbanization, exposed surface for soil has been reduced drastically with resultant reduction in percolation of rain, thereby depleting well water resource. rain harvest home is that the method of augmenting the natural filtration of rain in to the underground formation by some artificial ways. "Conscious assortment and storage of rain to cater to demands of water, for drinking, domestic purpose & irrigation is termed as rain harvest home."

For what reason Should We Build Rainwater Harvesting Project:

• To build Underground water table by reviving.

• It gives water when there is a dry season.

• To diminish soil disintegration.

• Water gathering gives a free water supply during provincial water limitation and in created nations is offers used to supply the fundamental supply.

• Can help alleviate flooding of low - lying zone.

• It additionally helps in the accessibility of compact water as downpour water is significantly free of saltiness and different salts.

Elements:

• The catchment(for example: roof) area where the rain falls.

• The conveyance or conduit system that channels the flow of water in a given direction.

• The first flush (a valve that ensures that run-off from the first spell of rain is flushed out and does not enter the system)

• Filtration tank

• Storage tank

• Recharge tank

Excessive water that we don’t use that water goes to the Recharge Tank and recharge the underground water.

The processing of a Rainwater water harvesting Project Should be like below: 

Fig: Sample of Recharge Tank and Pipe